120Mbps up/down up to 2KM
Specific Datasheet :
http://www.sicetelecom.it/214/it/Hiperlink_Premium/CPE_Light_Premium_17GHz_ATRH1719.pdf
€ 2.300,00
This is a 3U plug and play redundant power system for -48V with monitoring module and KWh-meter. ( DIN-components customizable )
- ( for 24V, a 4,5Amp 48V to 24V converter is used )
- KWH meter ( MODBUS )
( can be read via usb from Mikrotik router ( serial remote access ) for example.
- Monitoring Module is rs485 or rs485 via TCP/IP. ( Hot Swappable )
( can monitor Doorsensor, Watersensor, Smokesensor, Battery Temp, Battery Condition, BusVoltage, etc )
- 2x Rectifier Module / Psu ( Hot Swappable ) ( 2x 10A redundant system )
- Mains lightning protection module
- Mains C10 Amp protection
- 2 or 3 x 48V Load C6A Protection ( watched by Monitoring module )
- 2 batery groups ( for example 4x 12v 7Ah batteries )
- Modbus and RS485 can be monitored via "Mango automatation" for example.
( http://infiniteautomation.com )
€ 2.500,00
Plug and Play, Base station Cabinet for (Wifi) telecom. low power systems
-48V, 10Amp and/ or 2x 24V/4,5Amp.
- Cabinet can be on the ground base, pole mounted or wall mounted
- Walls isolated ( no double wall )
- Heat exchanger ( rs485 )
- Redundant PSU / Rectifiers hot swappable 2x Max 10Amp
- 48V and 24V
- Light when door open
- Monitoring of sensors ( Door, Battery, Load fuses, Battery Fuses etc )
( Monitoring rs485 or TCP/IP )
- KWh meter ( MODBUS rs485 )
- Batteries minimal 4x12v/7Ah ( 48V )
€ 5.400,00